The Ramsond foot pedal controller attaches to the 5-prong connection on the front panel of those Ramsond CT DY 3-IN-1 Plasma Cutter/TIG and ARC Welding units that are FOOT PEDAL READY. unit. Simply leave the 5 prong connection of the torch disconnected and connect the foot pedal 5 prong connection and turn the foot pedal ON/OFF button on the front panel to the ON position. The foot pedal function provides further flexibility to the operator to control the output current (Amp) via the foot controller. The foot pedal is also equipped with the a current adjustment knob on its side. Using this current adjustment knob, the user can set the maximum output current. For example, if the maximum output current is set to 200 Amps (using the adjustment knob of the foot pedal), when the foot pedal is fully depressed, the maximum output current will not exceed 200 Amps. The foot pedal is equipped with a spring loaded retraction system. So lifting the pressure off the foot pedal will lower the output current and ultimately return the current to zero. The foot pedal can be used with all functions, however it is typically used with the TIG function.

*IMPORTANT NOTE

The foot pedal controller only works with those units that are FOOT PEDAL READY. If your unit is not FOOT PEDAL READY, it will NOT support the foot pedal controller.